How To Operate
Tracking Points
Configuring Tracking Points
(1) In “Tracking Point Name”, 
enter the name of the point to be tracked (location/work/state, etc.).
By default, “Node” is displayed, but you can change it to an arbitrary and meaningful name.
You can add points with “+Tracking Point” 
in the upper right corner of the screen.
– Example: using logistics trace as an example, we set 5 tracking points.
Shipping, receiving, storage, sending, and receiving
(2) Set the point at which you want to start tracking in “Start tracking point”.
By default, the first “Tracking Point” (Node 1) set is displayed as the “Start tracking point”, but you can change it.
Connecting Tracking Points
(1) Select a tracking point.
(2) Select the tracking point you want to connect to with “+Add Next Tracking Point”.
If you do not want to branch the connection, select a new tracking point from the flowchart on the right side of the screen, then add it with “+ Add Next Tracking Point”.
(branching is described in the next section.)
Tracking Point Branching
(2) Select the next tracking point by clicking “+ Add Next Tracking Point.”
If there are multiple branches, use the “+ Add Next Tracking Point” to increase the number of branches.
Set “Recorded Items” for Tracking Points
on the right.(2) Under “Next Tracking Point,” you will see “Location Information”
“Skip Tracking”and“Set Recorded Items”
Location Information
Tracking won’t complete if location services are off.
to set up items. 
* ・ The code is a management code for the data to be recorded, and the name of the data item at the time of data download, report output, it will be used in the validation settings, so please set the code to be easy to understand.
・The code is alphanumeric only, and spaces cannot be entered.
・The same code cannot be used in one project. (the same name can be used.)
・You can set the input of the information to be recorded to “Required”.
If required, you must enter information before the trace can be completed.
・When selecting a tracking point, be sure to select it from the flowchart on the right side of the screen.
Please note that selecting from “▼” in “next tracking point” will change the “next tracking point”.
to configure the settings. 
You can set up a text input field (1 line).
(the input field is displayed on one line.) there is no limit to the number of characters you can enter. ）
(1) The input method can be manual input or voice input.
(2) Depending on the input support setting, it can also be performed by reading OCR*1 and barcode*2.
(3) You can also set the automatic saving of images taken with the OCR reader.
(4) Click the add button to complete the setting.
*2: Barcode reader is optional, so please contact us if you want to set it.
You can set up a text input field (multiple lines).
*The input field will be displayed on multiple lines. There is no limit to the number of characters you can enter.
(1) The input method can be manual input or voice input.
(2) Depending on the input support setting, it can also be performed by reading OCR*1 and barcode*2.
(3) You can also set the automatic saving of images taken with the OCR reader.
(4) Click the add button to complete the setting.
*1: Only alphanumeric characters are supported for input with the OCR reader.
*2: Barcode reader is optional, so please contact us if you want to set it.
You can install a numeric input box.
*suitable for information that you want to display numerically (weight, size, etc.).
(1) The number can be entered with “+-“.
(2) You can set the minimum and maximum values of the input values and the number of decimal places.
(3) The input method is manual input.
(4) Depending on the input support setting, OCR*1 and barcode*2 can also be read.
(5) You can also set the automatic saving of images taken with the OCR reader.
(6) Click the add button to complete the setting.
*1: Only alphanumeric characters are supported for input with the OCRreader.
*2: Barcode reader is optional, so please contact us if you want to set it.
You can install a radio button list.
Set to select only one of multiple choices.
(1) Enter the selection items in the button list.
*You can add a choice with “+Add”.
(2) Set the default settings for the choices.
(3) Click the add button to complete the setting.
You can install a check button type list.
Set to select multiple choices from multiple choices.
(1) Enter the selection items in the check box list.
*you can add a choice with “+Add”.
(2) You can set the default setting (multiple) of choices.
(3) Click the add button to complete the setting.
You can display the calendar and select a date.
It is suitable when date information (such as ship date) is required.
You can upload images and various files.
*Suitable for recording (attaching) packaging, product information, certificates, etc.
(1) Select “Image”to upload a photo.
(2) Select “Unspecified” to upload files such as pdf, excel, and word.
(3) Select “Barcode scan image”to upload the scanned barcode image.
(4) Click the “Add” button to complete the settings.
You can set up a phone number input field to send sms notifications of recorded information to third parties.
*When you set “Tracking notification” in the “Barcode” tab, you will receive a message by sms.
(1) Select the country code.
(2) Click the add button to complete the setting.
You can set up an input field for an email address to notify the recorded information to a third party by e-mail.
*When you set “Tracking notification” in the “Barcode” tab, you will receive a message in the email.
There are four available methods for calculation:
・Traditional Ton-Kilometer Method (Truck/Rail/Air/Ship)
・Improved Ton-Kilometer Method (Truck only)
・Fuel Method (Truck/Rail/Air/Ship) ・Fuel Economy Method (Truck only)
Configuring Exit Tracking Points
to be terminated and the setting is complete. 
